|
Whelen LIN3 Linear Super-LED Lighthead
The Linear3 (LIN3) Super-LED Lighthead is based on Whelen's highly popular TIR3. The LIN3 uses the same Linear Optics technology used in Whelen's Avenger Series. The LIN3 is very much like the TIR3 in feature set and specifications. All LIN3s come with clear outer lenses, colored LEDs and the New Deeper Style Black ABS Flange.
Features:
3 Generation III LEDs with Linear Optics.
Standard Mode: 10 Scan-Lock Flash Patterns plus Steady Burn.
Sync Mode: 7 Scan-Lock Flash Patterns each with Phase 1 and Phase 2.
Four Wire Synchronizable Version.
Fully encapsulated for vibration, moisture and corrosion resistance.
Black Surface Mount Flange Included Standard.
Designed for Horizontal Mounting.
Voltage: 12 VDC.
Amp draw: 390mA @ 13.6 VDC
Dimensions: 3-5/8" W x 1-5/16" H x 1-5/16" D.
Whelen Five Year Warranty
NOTE: This lighthead cannot be used as a Brake/Tail/Turn lighthead.
Now available with Green LEDs!
 |
 |
Whelen Chrome Flange for TIR3/LIN3 Lightheads
This Deep Chrome Plated Mounting Flange is designed to replace the Black Flange that comes standard with TIR3/LIN3 Lightheads. Dimensions: 1.25" H x 1" W x 3" L.
For TIR3/LIN3 Only. Not for use with any other lightheads.
Sold with lighthead only. Not sold individually.
Your Price:
$8.99
part# RFLANGCD
|
|
 |
Single TIR3/LIN3/LINZ6/GL3 Grille or Deck Mount Bracket
This bracket is designed for mounting one LIN3/TIR3/LINZ6/GL3 lighthead. Made from .125" aluminum with a durable black powder coat finish that resists rusting. Simplifies rear deck and grille mounting. This bracket is 2.5" high. Hardware not included.
Your Price:
$6.51
part# SNPA-TIR3-1
|
|
 |
Whelen Dual Side-By-Side Mounting Kit for LIN3/TIR3
This bracket is made from .0625" Aluminum and is for mounting two LIN3/TIR3 lightheads side-by-side. Includes mounting hardware.
Dimensions: 2.125" H x 7.50" W x 0.9375" D.
Your Price:
$12.09
part# RBKT2
|
|
 |
Whelen Matched Pair Trunk Mounting Kit for LIN3/TIR3
This bracket is designed specifically for use on Ford Crown Victorias, and is made from .0625" Aluminum. Intended for mounting two LIN3/TIR3 lightheads, one on each trunk hinge. Includes mounting hardware.
Dimensions: 2.5" H x 3.75" W x 2.5" D.
Your Price:
$15.81
part# RBKT3
|
|
 |
Crown Vic Trunk Mounting Bracket
This bracket is for mounting two LIN3/TIR3/GL3's to the trunk lid. Made from .125 aluminum with black powder coat finish which is durable and resists rusting. Bracket is 1.4" high and fits 1998 - 2008 Ford Crown Vics. Hardware not included. Sold individually.
Your Price:
$27.00
part# SNPA-TIR3-CV
|
|
 |
TIR3/LIN3/LINZ6/GL3 License Plate Bracket
Sirennet.com now has a license plate bracket available for some of our most popular lightheads. Add some additional warning lights to your vehicle today!
Features:
All aluminum body
Stainless mounting screws
Quality black powder coating
Your Price:
$13.33
part# SNPA-T3L4-UN
|
|
 |
TIR3/LIN3/GL3/LINZ6 Swivel Mount Bracket
This versatile and attractive bracket is for mounting one TIR3, LIN3, GL3 or LINZ6 and allows you to set the lighthead at the angle that best fits your application. Made from black powder coated aluminum which is durable and resists rusting. Mounting hardware is included.
Features:
All aluminum body
Stainless mounting screws
Multiple mounting options
Quality black powder coating
Your Price:
$21.39
part# SNPA-TIR3SMBRKT
|
|
 |
Whelen LIN3/TIR3/LINZ6/GL3 Grommet Mount Kit
Optional Mounting Kit for LIN3/TIR3/LINZ6/GL3 LED Lightheads.
In body rubber grommet housing.
Sold with lighthead only. Not sold individually.
Your Price:
$6.50
part# RGROMMET
|
|
|
