|
Whelen LIN3 Linear Super-LED Lighthead
The Linear3 (LIN3) Super-LED Lighthead is based on Whelen's highly popular TIR3. The LIN3 uses the same Linear Optics technology used in Whelen's Avenger Series. The LIN3 is very much like the TIR3 in feature set and specifications. All LIN3s come with clear outer lenses, colored LEDs and the New Deeper Style Black ABS Flange.
Features:
3 Generation III LEDs with Linear Optics.
Standard Mode: 10 Scan-Lock Flash Patterns plus Steady Burn.
Sync Mode: 7 Scan-Lock Flash Patterns each with Phase 1 and Phase 2.
Four Wire Synchronizable Version.
Fully encapsulated for vibration, moisture and corrosion resistance.
Black Surface Mount Flange Included Standard.
Designed for Horizontal Mounting.
Voltage: 12 VDC.
Amp draw: 390mA @ 13.6 VDC
Dimensions: 3-5/8" W x 1-5/16" H x 1-5/16" D.
Whelen Five Year Warranty
NOTE: This lighthead cannot be used as a Brake/Tail/Turn lighthead.
Now available with Green LEDs!
 |
 |
Whelen Chrome Flange for TIR3/LIN3 Lightheads
This Deep Chrome Plated Mounting Flange is designed to replace the Black Flange that comes standard with TIR3/LIN3 Lightheads. Dimensions: 1.25" H x 1" W x 3" L.
For TIR3/LIN3 Only. Not for use with any other lightheads.
Your Price:
$8.99
part# RFLANGCD
|
|
 |
Windshield Side Mounting Kit for TIR3
Facilitates mounting a single TIR3 module at the bottom of the the windshield/fairing on either side of the front forks.
Includes Stainless Steel Bracket and Chrome Flange.
Made for Harley-Davidson Police Bikes.
Your Price:
$10.85
part# RBKTHD1
|
|
 |
Whelen Under Headlight Mounting Kit for TIR3
Facilitates mounting a single TIR3 module directly under the headlight.
Includes Stainless Steel Bracket and Chrome Flange.
Made for Harley-Davidson Police Bikes.
Your Price:
$15.19
part# RBKTHD5
|
|
 |
Single TIR3/LIN3/LINZ6/GL3 Grille or Deck Mount Bracket
This bracket is designed for mounting one LIN3/TIR3/LINZ6/GL3 lighthead. Made from .125" aluminum with a durable black powder coat finish that resists rusting. Simplifies rear deck and grille mounting. This bracket is 2.5" high. Hardware not included.
Your Price:
$7.75
part# SNPA-TIR3-1
|
|
 |
Whelen Dual Side-By-Side Mounting Kit for LIN3/TIR3
This bracket is made from .0625" Aluminum and is for mounting two LIN3/TIR3 lightheads side-by-side. Includes mounting hardware.
Dimensions: 2.125" H x 7.50" W x 0.9375" D.
Your Price:
$12.09
part# RBKT2
|
|
|
