SIRENNET.COM - Able 2 Standard LED Arrow Board

Partitions & Seats Pelican Power Supplies Sirens Speakers Speaker &
Siren Packages Strobe Kits Strobe Lights Switch Boxes Traffic Control Search Site Map New Products

Traffic Control

Able 2 Standard LED Arrow Board

The Standard Arrow Board is a proven lighting source, being the standard for over 20 years. Now it is even more reliable due to the use of modern LEDs. The ten 4 inch 16 LED PAR 36 Lamps or Ultra-Brite 52 LED PAR 36 LED Amber Lamps flash at a rate of 60 FPM to direct oncoming traffic. The four directional patterns are: Pass Right (five lamps in right panel), Pass Left (five lamps in left panel), Pass Both Sides (all ten lamps flash), Caution (center bar). It is constructed of heavy gauge epoxy coated aluminum. 20 foot pre-wired harness connects easily to the control box.

Features:

Full-size arrow board comes with a control box, heavy-duty cables, plug-in connector and plastic dust cover.

Ten 4 inch 16 LED PAR 36 Lamps or Ultra-Brite 52 LED PAR 36 LED Amber Lamps flash 60 times per minute in four operational modes: Right Arrow, Left Arrow, Double Arrow and Center Bar.

All LED Lamps are weather-sealed and shock-mounted.

Cab-mounted, 3-relay Control Box has pilot lights that indicate flash patterns and on/off and mode selection switches.

Control Box connects easily to the Arrow Board with a 20' pre-wired harness

Control Box comes with a bail mounting bracket and all necessary wiring.

Boards are constructed of heavy-gauge, epoxy-coated aluminum.

Optional Arrow Board mounting brackets are available.

Specifications:

12 volts

Maximum Amp Draw: 3 Amps

Dimensions: Controller - 1 1/4" H x 6" W x 6 1/4" D.

Dimensions: Arrow Board - 13" H x 54" W x 3" D.

Weight: 8 lbs.

Mounting Options:

Standard Permanent Mount Brackets

Two sturdy black epoxy coated aluminum brackets.
The hardware required to attach to Arrow Board included.
The hardware required to attach to the vehicle is not included.

Magnetic Mounting Brackets

Two sturdy black epoxy coated aluminum brackets.
Four 90 pound black epoxy coated, ceramic magnets.
The hardware required to attach to Arrow Board included.

Permanent Roof Gutter Mount System

Solidly constructed of heavy guage, epoxy coated aluminum.
Stainless Steel Hold Down System securely fastens to the rain gutters of the vehicle.
Fully adjustible so that it can fit a wide variety of vehicles that have rain gutters.
All hardware and detailed instructions are provided.


Permanent Mount Brackets	Magnetic Mount Brackets	Roof Gutter Mount System

Your Price: $470.00
part# AB02_6