|
Code 3 Z3 Remote Siren
The Code 3 Z3 Remote Siren makes the Officers job easier!
Easy to operate control head with 3 distinct zones:
- Sirens & primary lighting (red),
- auxiliary lighting and other equipment (blue),
- and traffic or warning function (yellow).
Different size and shape buttons are quickly found allowing you to operate all the light and siren functions without taking your eyes off the road.
Buttons are also backlit and change color.
Programmable 3 level slide switch with a programmable 4th position!
8 programmable auxiliary buttons (2 can be programmed for positive or ground switching).
5 programmable siren buttons (program different tones for each one).
ArrowStik functions can be programmed for different flash patterns and speeds for each direction, as well as the warning flash pattern itself.
Backlit brightness is now officer adjustable just like the dashboard dimmer switch giving you the appropriate lighting for your eyes!
PA microphone volume can also be adjusted by the officer should the need arise to meet varying noise conditions.
PA stuck mic sensor automatically returns the siren to normal function should the microphone switch get stuck in PA mode.
Built in "Battery Voltage Check" Sensor shuts down lights and sirens when voltage runs below a programmed setting. No more dead batteries!
Sleep Mode Timer to shut the lights and siren off after a specific preset time if the ignition is turned off.
Horn-ring transfer allows you to effortlessly scroll through siren functions on the steering wheel without having to take your eyes off the road.
Built in Park Kill to automatically turn lights and siren functions off when the vehicle is put in park.
This feature is also designed for positive or ground inputs so that park kill can also be activated by other inputs.
Built In Siren lock function that does not allow siren tones to come on until emergency lighting is activated.
All of these great features can be programmed in a snap to your specific needs!
The Code 3 Z3 Remote Siren makes the Fleet Manager and Installers job easier!
Intuitive Configuration Software easily loaded onto any PC using Microsoft Windows XP or Windows 7.
Programming is so easy that a Z3 can be completely configured and set up ready for your specific fleet in less than 5 minutes.
USB connection allows siren configuration to be downloaded to the amplifier in seconds.
Program can be saved and then downloaded to multiple amplifiers in minutes making the programming of multiple sirens quick and easy.
All connections are done with plugs and connectors that snap in quickly and firmly.
All fusing is easily accessible for quick changes should one blow, and the control head gives a visual indication of which fuse has blown.
Control head connection is done with one data cable.
PA microphone is connected to the control head itself and not the amplifier box, no long interface cable needed for the microphone anymore.
Programming is stored in the amplifier box and not the control head. If a control head goes bad simply attach another one and it will instantly work with the existing amplifier box.
General Specifications:
Control Head: 6.80" L x 3.30" H x 1.07" D.
Amplifier: 9.75" L x 6.832" W x 3.936" D.
Light Control Current Load:
- 3-Level Switch, 4 Outputs, 50 Amps Maximum Combined Total
- 4 Auxiliary Switches A thru D: 5 Amps Maximum Each Aux
- 4 Auxiliary Switches E thru H: 10 Amp Maximum Each Aux
Total Siren Output Capacity: 200 Watts (can drive two 100 Watt speakers)
Operating Voltage: 10-15 VDC (negative ground)
Operating Temperature: -22F to +149F (-30C to +65C)
Meets SAEJ1849, California Title 13, and 2004/104/EC when properly configured
Code 3 Five Year Warranty
|
|
